力士樂DKS01.1-W050A-DL01-01-FW維修：F218 Heatsink Overtemperature Shutdown散熱器過熱停機。
Description:說明：The temperature of the DKC heatsink will be monitored. If the temperature of the heatsink is too high, the drive will power down in order to protect against damage.將監測DKC散熱器的溫度。如果散熱器溫度過高，驅動器將按順序斷電以防止損壞。
力士樂伺服放大器線路板維修：Cause:
1. Ambient temperature is too high. The specifiedoperational data is valid up to an ambient temperature of 45°C.
環境溫度過高。指定的操作數據在45°C的環境溫度下有效。
2. The DKC's heatsink is dirty.
DKC的散熱器臟了。
3. Air flow is prevented by other assembly parts or a control cabinet panel assembly.
氣流由其他組件零件或控制柜面板組件阻止。
4. Heatsink blower may be defective
散熱器鼓風機可能存在故障
Remedy:
1. Reduce the ambient temperature; for example, through cooling of the control cabinet
降低環境溫度；例如，通過冷卻控制柜
2. Remove any obstruction or dirt from the heatsink.
清除散熱器上的任何障礙物或污垢。
3. Install the device vertically and clear a large enough area for proper heatsink ventilation.
垂直安裝設備，并清理足夠大的區域，以便進行適當?shù)纳崞魍L。
4. Exchange drive.
交換驅動器。
轉載請注明出處：上海仰光電子科技專業伺服驅動器維修,伺服電機維修
本文鏈接：http://m.9s7n.com/fuwu/Services_Show19858.htm
伺服驅動器維修 伺服電機維修 觸摸屏維修 變頻器維修
電話：021-50157782
手機：13817011982 微信同號
郵箱：shygdzi@163.com
聯系人：張工
網址：http://m.9s7n.com
【 我們確保修好測試好給客戶！�。�！】
下一篇：沒有了
